Applications

Contec Fiber offers solutions for a wide range of applications: Speed up the construction time for your industrial floor or outdoor surface. Use the advantages of fibre – reinforced concrete to improve cost – e⁠f⁠f⁠e⁠c⁠t⁠i⁠v⁠e⁠n⁠e⁠s⁠s and conserve facilities.

Industrial floors

Over the course of many years, millions of square metres of floors in production halls, warehouses and shopping centres have already been reinforced with high-performance synthetic fibres. Depending on what is required, different types of fibres are used. If necessary, our engineers prepare a free, static calculation based on the latest standards.

See more

Exterior s⁠u⁠r⁠f⁠a⁠c⁠e⁠s

Over the course of many years, hundreds of thousands of square metres of weathered and heavily used exterior surfaces have already been reinforced with our synthetic fibres. Depending on what is required, different types of fibres are used. For low to medium loads, we recommend Fibrofor High Grade, a splice fibre specially developed for this purpose. For high loads, on the other hand, Fibrofor Diamond, a high-performance monofibre, comes into play.

See more

Precast concrete parts

The production and installation of steel reinforcement in the precast part industry is often very time-consuming and cost-intensive. And the increasingly complex shapes of the parts pose an additional challenge. The use of Concrix eliminates or mitigates these problems by massively reducing the use of steel or even replacing it completely.

See more

Infrastructure buildings

Our Fibrofor High Grade, Fibrofor Diamond or Concrix fibres are used for roads, roundabouts, bus stops, field tracks, etc. Our fibres’ resistance to salt water and also to alkali and acid ensures the durability and long life of the surfaces.

See more

Agriculture

In the agricultural sector, hundreds of thousands of square metres of floors in cattle sheds, machine sheds, driving silos, slurry pits, cesspools, grain stores, etc. have already been reinforced with our fibres. Synthetic fibres are especially ideal for the agricultural sector, as they are resistant to aggressive liquids and also eliminate the risk of injury to animals.

See more

Shotcrete

The use of synthetic macrofibres in shotcrete is widespread and established. As an alternative to steel fibres and steel mesh reinforcement, the bicomponent macrofibre C⁠o⁠n⁠c⁠r⁠i⁠x offers additional advantages in terms of durability, sustainability and resource conservation.

See more

Concrete surfaces in contact with water

One thing sewage treatment plants, sewers and parts of power plants all have in c⁠o⁠m⁠m⁠o⁠n is that there is a high risk of conventional steel reinforcement corroding due to penetrating water. Sewage treatment plants and sewers are even more problematic, as they are often exposed to particularly aggressive liquids.

See more

Special applications

Special applications, such as edge beams for bridges, cycling tracks, artificial ice rinks, slope stabilisation, excavation pit stabilisation, repairs and much more, are other possible uses where the right synthetic fibre can make an important contribution.

See more

Questions? Feel free to contact us.

We will only use the data you provide to contact you and will keep it until the purpose has been fulfilled. Further information on data protection and contact options can be found at the bottom of each page.

Please enter an e-mail address to download the file.

Your e-mail address will only be used for sending the file and will not be saved.