Applications

Exterior s⁠u⁠r⁠f⁠a⁠c⁠e⁠s

Corrosion-free reinforcement system with synthetic fibres

Efficient and durable

Over the course of many years, hundreds of thousands of square metres of weathered and heavily used exterior surfaces have already been reinforced with our synthetic fibres.
Depending on what is required, different types of fibres are used. For low to medium loads, we recommend Fibrofor High Grade, a splice fibre specially developed for this purpose. For high loads, on the other hand, Fibrofor Diamond, a high-performance monofibre, comes into play. Both types of fibres spread quickly and without clumping in the concrete and are very easy to work into the surface. In addition to functioning as steel substitutes, both fibres have been shown to optimise the shrinkage behaviour of concrete.

If necessary, our engineers prepare a free, static calculation based on the latest standards.

Services

Synthetic fibres for e⁠x⁠t⁠e⁠r⁠i⁠o⁠r surfaces

The ecological and durable reinforcement solution.

Services

Advantages

Economical a⁠l⁠t⁠e⁠r⁠n⁠a⁠t⁠i⁠v⁠e to steel reinforcement in e⁠x⁠t⁠e⁠r⁠i⁠o⁠r areas.

  • Data request sheet for Industrial Floors and Outside Areas Data request sheet for Industrial Floors and Outside Areas
  • Experience

    Millions of square metres of floors have been reinforced with high-performance synthetic fibres for more than 30 years. Typical areas of application are exterior areas, airports and parking areas.

  • Reinforcement costs

    The total or partial elimination of conventional steel reinforcement drastically reduces reinforcement costs. The labour-intensive and thus cost-intensive installation of steel is no longer necessary.

  • Easy to use

    The fibres are easy to mix in and distribute evenly in the concrete. All types of surface processing are possible, as the fibres can be worked into the surface very easily.

  • Maintenance-free

    Polyolefin fibres are resistant to salt water (exterior surfaces, roads, etc.).

Products for this application

Concrix ES

Concrix ES acts as structural reinforcement and can also be used in the static area.

See more

Concrix HS35

Concrix HS35 is used for precast parts as a reinforcement substitute and edge p⁠r⁠o⁠t⁠e⁠c⁠t⁠i⁠o⁠n.

See more

Fibrofor D⁠i⁠a⁠m⁠o⁠n⁠d

Fibrofor Diamond is a high-performance PP foil fibre for primary concrete reinforcement.

See more

Fibrofor High Grade

The fibre with more than 30 years of experience in a⁠p⁠p⁠l⁠i⁠c⁠a⁠t⁠i⁠o⁠n⁠s such as industrial floors and exterior surfaces.

See more
See all

Questions? Feel free to contact us.

We will only use the data you provide to contact you and will keep it until the purpose has been fulfilled. Further information on data protection and contact options can be found at the bottom of each page.

Please enter an e-mail address to download the file.

Your e-mail address will only be used for sending the file and will not be saved.