Back to overview

Applications

Industrial floors

Established reinforcement system with synthetic fibres

Glänzender Industrieboden der mit Fibrofor High Grade ausgeführt wurde
Industrieboden einer Produktionshalle der mit Fibrofor Diamond ausgeführt wurde
Industrieboden in einer Reifenhandlung der mit Fibrofor High Grade ausgeführt wurde
Industrieboden mit Kleinbagger der mit Fibrofor High Grade ausgeführt wurde

Efficient and durable

Over the course of many years, millions of square metres of floors in production halls, warehouses, shopping centres and car parks have already been reinforced with our synthetic fibres. Depending on what is required, different types of fibres are used. For low to medium loads, we recommend Fibrofor High Grade, a splice fibre specially developed for this purpose. For high loads, on the other hand, Fibrofor Diamond, a high-performance monofibre, comes into play. Both types of fibres spread quickly and without clumping in the concrete and are very easy to work into the surface. In addition to functioning as steel substitutes, both fibres have been shown to optimise the shrinkage behaviour of concrete. If necessary, our engineers prepare a free, static calculation based on the latest standards.

Services

Synthetic fibres for i⁠n⁠d⁠u⁠s⁠t⁠r⁠i⁠a⁠l floors

The ecological and economical reinforcement solution.

Services

Advantages

Economical alternative to steel reinforcement in mono slabs.

  • Data request sheet for Industrial Floors and Outside Areas Data request sheet for Industrial Floors and Outside Areas
  • Experience

    Millions of square metres of floors have been reinforced with high-performance synthetic fibres for more than 30 years. Typical areas of application are production halls, warehouses, airports and car park areas.

  • Reinforcement costs

    The total or partial elimination of conventional steel reinforcement drastically reduces reinforcement costs. The labour-intensive and thus cost-intensive installation of steel is no longer necessary. The possibility of working with few joints also reduces the cutting effort.

  • Easy to use

    The fibres are easy to mix in and distribute evenly in the concrete. All types of surface processing are possible, as the fibres can be worked into the surface very easily.

Industrieboden mit vollen Regalen der mit Fibrofor Diamond ausgeführt wurde

Questions? Feel free to contact us.

We will only use the data you provide to contact you and will keep it until the purpose has been fulfilled. Further information on data protection and contact options can be found at the bottom of each page.

Send

Please enter an e-mail address to download the file.

Your e-mail address will only be used for sending the file and will not be saved.

Request