Products

Concrix HS35

The short bicomponent synthetic fibre

For structural reinforcement

This shorter version of the unique bicomponent synthetic macrofibre Concrix ES with a textured surface enhances the durability of precast concrete parts and helps to reduce edge chipping due to transport and installation.

Concrix HS35 fibres act as structural reinforcement, enhance the impact strength of the concrete and can also be used in the static area. The fibre bundling guarantees fast, three-dimensional distribution without clumping during the mixing process. Concrix HS35 is also used in dry shotcrete and achieves respectable working capacities even at low dosages.

Services

Concrix HS35

The easily workable m⁠a⁠c⁠r⁠of⁠i⁠b⁠r⁠e.

Advantages

Concrix HS35 is a bicomponent macrofibre for structural concrete reinforcement.

  • Features

    The imprinted surface provides efficient anchoring in the concrete and guarantees rapid three-dimensional distribution during the mixing process in the matrix. The technical parameters of the concrete can be used for static calculations.

  • Dosage

    The dosage guideline for Concrix HS35 is 2.0 - 7.5 kg per m³ of concrete as structural reinforcement. Concrix HS35 is available in the standard length of 35 mm.

  • Eigenschaften

    Material: polyolefins Shape: structured fibre in PowerPaks Bulk density: 0.91 g/cm³ Length: 35 mm, tolerance +/- 5% Number of fibres per kg: approx. 150,000 Colour: yellow Acid/alkali resistance: inert Tensile strength: approx. 620 N/mm² E modulus: > 11 GPa Softening point: approx. 150 °C Diameter: 500 μm

  • Application

    Concrix HS35 is used in shotcrete, prefabrication, industrial floors, concrete renovations, concrete piles, special foundations and various special applications in concrete construction.

Other products

Concrix ES

Concrix ES acts as structural reinforcement and can also be used in the static area.

See more

Concrix SA

Concrix SA is used for dry spraying and precast parts.

See more

Concrix DM

Concrix DM is used in mortar mixes to increase impact strength.

See more

Concrix M507

Concrix M507 for temporary stabilisation with wet shotcrete

See more

Fibrofor D⁠i⁠a⁠m⁠o⁠n⁠d

Fibrofor Diamond is a high-performance PP foil fibre for primary concrete reinforcement.

See more

Fibrofor High Grade

The fibre with more than 30 years of experience in a⁠p⁠p⁠l⁠i⁠c⁠a⁠t⁠i⁠o⁠n⁠s such as industrial floors and exterior surfaces.

See more

Fibrofor S⁠t⁠a⁠n⁠d⁠a⁠r⁠d

Fibrofor Standard enhances the impact resistance and i⁠n⁠c⁠r⁠e⁠a⁠s⁠e⁠s the durability.

See more

Fibrofor Multi

Fibrofor Multi meets all criteria and specifications of a pure, multifilament polyolefin PP fibre for plastic shrinkage reinforcement. The fibre is available in two cut lengths of 6 or 12 mm.

See more

Fibrofor Green

Fibrofor Green is used where plastic shrinkage needs to be controlled.

See more
See all

Questions? Feel free to contact us.

We will only use the data you provide to contact you and will keep it until the purpose has been fulfilled. Further information on data protection and contact options can be found at the bottom of each page.

Please enter an e-mail address to download the file.

Your e-mail address will only be used for sending the file and will not be saved.