Products

Fibrofor D⁠i⁠a⁠m⁠o⁠n⁠d

The high-performance monofibre for industrial floors

Primary concrete reinforcement

To eliminate steel reinforcement completely – or at least reduce it to a minimum – even in floors with very high loads, we have developed the Fibrofor Diamond. Fibrofor Diamond is a high-performance monofibre for primary concrete reinforcement. The geometry and thermal treatment ensure rapid, uniform distribution and mixing in the concrete, while the uniquely high number of fibres guarantees optimised three-dimensional reinforcement.

The dosage guideline for Diamond is 2 - 3 kg per m³ of concrete. The dosage depends on the area of application and the set requirements and is determined using a static calculation.

Services

Fibrofor Diamond

The easily workable foil fibre for mono slabs.

Advantages

The high-performance meso fibre for industrial floors.

  • Features

    Fibrofor Diamond is a high-performance monofibre for structural concrete reinforcement. The uniquely high number of fibres ensures optimised three-dimensional reinforcement. The increased technical parameters of the concrete can be used for static calculations.

  • Dosage

    The dosage guideline for Fibrofor Diamond is 2 - 3 kg per m³ of concrete as structural reinforcement. The dosage depends on the area of application and the set requirements and is specified on an individual basis. Fibrofor Diamond is available in the standard length of 38 mm.

  • Properties

    Version: monofibre Material: pure, thermally treated polyolefins Shape: foil fibre Bulk density: 0.91 g/cm³ Length: 38 mm, tolerance +/- 5% Width: 0.9 mm Colour: white Acid/alkali resistance: inert Tensile strength: ≥ 400 N/mm² E modulus: approx. 9,500 N/mm² Softening point: approx. 150 °C

  • Application

    Fibrofor Diamond is used in floor slabs, concrete walls, industrial floors and exterior surfaces such as concrete ceilings, etc. On the basis of Eurocode 2, it is possible to furnish static evidence of the load-bearing safety of slabs and other structures.

Other products

Concrix ES

Concrix ES acts as structural reinforcement and can also be used in the static area.

See more

Concrix HS35

Concrix HS35 is used for precast parts as a reinforcement substitute and edge p⁠r⁠o⁠t⁠e⁠c⁠t⁠i⁠o⁠n.

See more

Concrix SA

Concrix SA is used for dry spraying and precast parts.

See more

Concrix DM

Concrix DM is used in mortar mixes to increase impact strength.

See more

Concrix M507

Concrix M507 for temporary stabilisation with wet shotcrete

See more

Fibrofor High Grade

The fibre with more than 30 years of experience in a⁠p⁠p⁠l⁠i⁠c⁠a⁠t⁠i⁠o⁠n⁠s such as industrial floors and exterior surfaces.

See more

Fibrofor S⁠t⁠a⁠n⁠d⁠a⁠r⁠d

Fibrofor Standard enhances the impact resistance and i⁠n⁠c⁠r⁠e⁠a⁠s⁠e⁠s the durability.

See more

Fibrofor Multi

Fibrofor Multi meets all criteria and specifications of a pure, multifilament polyolefin PP fibre for plastic shrinkage reinforcement. The fibre is available in two cut lengths of 6 or 12 mm.

See more

Fibrofor Green

Fibrofor Green is used where plastic shrinkage needs to be controlled.

See more
See all

Questions? Feel free to contact us.

We will only use the data you provide to contact you and will keep it until the purpose has been fulfilled. Further information on data protection and contact options can be found at the bottom of each page.

Please enter an e-mail address to download the file.

Your e-mail address will only be used for sending the file and will not be saved.