Products

Fibrofor Green

The renewable natural fibre against early shrinkage cracks

Distributes constraint stresses

Fibrofor Green is a natural fibre that improves the properties of concrete and mortar components. The fibre guarantees uniform and rapid three-dimensional distribution in the matrix.
Fibrofor Green efficiently reduces shrinkage cracks in the early stages of the setting phase.
Fibrofor Green prevents sedimentation, the called matrix settling.

Fibrofor Green is used wherever it is necessary to control plastic shrinkage and distribute the constraint stresses that occur.

Fibrofor Green is used in the production of floor slabs, prefabricated elements, screeds, stuccos and shotcrete.

A dosage of at least 0.6 kg/m³ to at most 0.9 kg/m³ is recommended for screeds. For concrete structures, a standard dosage of at least 0.6 kg/m³ is decisive. The workability is not negatively influenced by the addition of the fibres, nor does it require any adjustment to the plasticiser content.

Service

Fibrofor Green

The natural fibre against shrinkage cracks

Advantages

Fibrofor Green is a natural fibre for improving the properties of structural elements made of concrete and mortar.

  • Features

    Green efficiently reduces shrinkage cracks in the early stages of the setting phase and in most cases replaces the structural steel inlay for this area.

  • Dosage

    A dosage of at least 0.6 kg/m³ to at most 0.9 kg/m³ is recommended for screeds. For concrete structures, a standard dosage of at least 0.6 kg/m³ is decisive. Fibrofor Green is available in the standard lengths of approx. 10 mm.

  • Properties

    Material: pelletised natural fibre Shape: multifilament Bulk density: approx. 0.200 g/cm³ Cutting length: approx. 10 mm Tensile strength: NDA Diameter: approx. 20 - 250 μm

  • Application

    Fibrofor Green is used wherever it is necessary to control plastic shrinkage and to distribute the constraint stresses that occur. Fibrofor Green is used in the production of floor panels, precast elements, screeds, stuccos and shotcrete.

Other products

Concrix ES

Concrix ES acts as structural reinforcement and can also be used in the static area.

See more

Concrix HS35

Concrix HS35 is used for precast parts as a reinforcement substitute and edge p⁠r⁠o⁠t⁠e⁠c⁠t⁠i⁠o⁠n.

See more

Concrix SA

Concrix SA is used for dry spraying and precast parts.

See more

Concrix DM

Concrix DM is used in mortar mixes to increase impact strength.

See more

Concrix M507

Concrix M507 for temporary stabilisation with wet shotcrete

See more

Fibrofor D⁠i⁠a⁠m⁠o⁠n⁠d

Fibrofor Diamond is a high-performance PP foil fibre for primary concrete reinforcement.

See more

Fibrofor High Grade

The fibre with more than 30 years of experience in a⁠p⁠p⁠l⁠i⁠c⁠a⁠t⁠i⁠o⁠n⁠s such as industrial floors and exterior surfaces.

See more

Fibrofor S⁠t⁠a⁠n⁠d⁠a⁠r⁠d

Fibrofor Standard enhances the impact resistance and i⁠n⁠c⁠r⁠e⁠a⁠s⁠e⁠s the durability.

See more

Fibrofor Multi

Fibrofor Multi meets all criteria and specifications of a pure, multifilament polyolefin PP fibre for plastic shrinkage reinforcement. The fibre is available in two cut lengths of 6 or 12 mm.

See more
See all

Questions? Feel free to contact us.

We will only use the data you provide to contact you and will keep it until the purpose has been fulfilled. Further information on data protection and contact options can be found at the bottom of each page.

Please enter an e-mail address to download the file.

Your e-mail address will only be used for sending the file and will not be saved.