Back to overview


Fibrofor High Grade

The mother of all synthetic microfibres

Detailaufnahme von Fibrofor High Grade
Detailaufnahme von Fibrofor High Grade mit netzartiger Struktur
Detailaufnahme von Fibrofor High Grade mit netzartiger Struktur

Decades of e⁠x⁠p⁠e⁠r⁠i⁠e⁠n⁠c⁠e

The high-performance fibre Fibrofor High Grade is the result of over 30 years of practical experience.
Their quality edge and unrivalled quality characteristics are achieved through the choice of high-quality raw materials, the elaborate production process and the thermal treatment. Precise fibrillation is crucial for fast, uniform distribution and mixing in the concrete. Due to its special surface texture, which ensures better anchoring in the concrete matrix, Fibrofor High Grade has been used successfully for decades in industrial flooring and exterior applications.

Thanks to these parameters, 1 kg of Fibrofor High Grade per m³ of concrete is sufficient where otherwise 20 - 25 kg of steel fibres or up to 40 kg of conventional steel reinforcement would often be required.

It is determined on the basis of a project-specific static calculation whether the steel reinforcement can be completely replaced. Our concepts follow current standards (Eurocode) and recommendations.


Fibofor High Grade

The most economical s⁠o⁠l⁠u⁠t⁠i⁠o⁠n for e⁠x⁠t⁠e⁠n⁠s⁠i⁠v⁠e applications.


Fibrofor High Grade is a thermally treated, bundled, fibrillated high-performance fibre.

  • Features

    The especially rough provides efficient anchoring in the concrete and guarantees rapid three-dimensional distribution during the mixing process in the matrix. The increased technical parameters of the concrete can be used for static calculations.

  • Dosage

    Fibrofor High Grade's dosage guideline is 1 kg per m³ of concrete as structural reinforcement. For shotcrete, a dosage of 1.5 - 6 kg of Fibrofor High Grade per m³ of sprayed material is recommended. Fibrofor High Grade is available in lengths of 19 mm (type 190) and 38 mm (type 380).

  • Properties

    Material. pure, thermally treated polyolefins Shape: twisted, fibrillated Bulk density: 0.91 g/cm³ Lengths: 19 mm, tolerance +/- 1.5 mm or 38 mm, tolerance +/- 5% Colour: beige Acid/alkali resistance: inert Tensile strength: approx. 400 N/mm² E modulus: approx. 4,900 N/mm² Softening point: approx. 150 °C Foil thickness: approx. 80 μm

  • Application

    Fibrofor High Grade is used in prefabrication, pumped concrete, crane concrete, shotcrete, bridge and concrete slab construction, floor slabs, concrete walls, concrete renovation, concrete piles, narrow walls, special foundations and various special applications in concrete construction.

Nächtliche maschinelle Ausführung einer Aussenfläche mit Fibrofor High Grade

Other products

Concrix ES

See more

Concrix M507

See more

Concrix HS35

See more

Concrix SuperFloor

See more

Concrix SA

See more

Concrix DM

See more

Fibrofor D⁠i⁠a⁠m⁠o⁠n⁠d

See more

Fibrofor S⁠t⁠a⁠n⁠d⁠a⁠r⁠d

See more

Fibrofor Multi

See more

Fibrofor Green

See more
See all

Questions? Feel free to contact us.

We will only use the data you provide to contact you and will keep it until the purpose has been fulfilled. Further information on data protection and contact options can be found at the bottom of each page.


Please enter an e-mail address to download the file.

Your e-mail address will only be used for sending the file and will not be saved.