Prefab modular houses – Tallinn (EST) Projects Description Prefab modular houses made in Estonia. The element thickness of walls, floor and ceiling is 7 cm and only fibre reinforced concrete. No fibres visible at the surface of elements made with white cement. Advantages of Fibrofor High Grade Solution: Lower cost for reinforcement (replacement or reduction…
Various precast elements, from simple pure fibre designs, to more complex hybrid solutions… Projects Advantages of Concrix ES Solution: Massive reduction of steel reinforcement assembly Significant reduction of CO₂ emissions No corrosion Longer durability 3-dimensional reinforcement reaching all edges Customised structural dimensioning
Precast facade elements – Mirador de Malilla, Valencia (ES) Projects Advantages of Concrix ES Solution: Increased production efficiency Cost reduction 3-dimensional reinforcement reaching all edges Application Precast facade Project Mirador de Malilla, Valencia Manufacturer INDAGSA – Grupo Ortiz Fibre Concrix ES
Waste water intake structure (NL) Projects Description This prefabricated concrete element is made with C 50/60 concrete and reinforced with 4,0 kg/m³ macro synthetic fibres. The use of the fibres is mainly to avoid damages, especially at the edges, during transport and handling of the elements. Advantages of Concrix ES Solution: Lower cost for reinforcement…
Photo story – Prefab wall elements for detached-family houses, NL Projects Application Precast seperation wall Object Prefab walls for single-family houses Country Netherlands Year 2018 Fibre Concrix ES
Precast Traffic Block Element For Railway Tunnel – Israel (ISR) Projects Description These elements between the rails allows rescue vehicles driving into the railway tunnel in case of an emergency. Advantages of Concrix ES Solution: Durability of Concrix and thus longer lifetime/less maintenance Lower cost for reinforcement (totally replacement of steel) Rapid production of…
Precast sea façade elements at Marina Coastal Expressway – Singapore (SG) Projects Description The prefabricated sea façade elements of C35/45 concrete were reinforced with 4.0 kg/m³ bi-component macro synthetic fibres in combination with a reduced steel reinforcement, which was necessary to fix and anchor the elements on piles. Advantages of Concrix ES solution: This hybrid…
Plate Elements For Outside Café Deck (ES) Projects Description For extending the outdoor seating area of cafes and bars. Our customer Escofet in Spain manufactures the concrete slabs needed for this with the help of synthetic fibres. This simplifies production and saves CO₂. These elements are only reinforced with our short synthetic macrofibres Concrix SA…
Power Distributor Cabinet (CH) Projects Description Prefabricated cabinet elements manufactured by our customer Bétontec in Switzerland. The use of Concrix ES fibres helps to almost totally replace the originally designed steel reinforcement to make the manufacture of the thin walled (50 mm) control cabinets much easier. It is important that the customer’s consistently high-quality standards…
Cable Shaft (CH) Projects Description The use of Concrix ES fibres helps to reduce the original designed steel reinforcement for easier fabrication, due to less steel reinforcement in the formwork. At the same time, there is an improvement in quality due to three-dimensional fibre reinforcement into every corner of the element, which gives better protection…
